Wheel loader Indonesia is a kind of earthwork construction machinery, widely used in the highway, railway, construction, water and electricity, port, mine and other construction projects. Wheel loaders for sale is mainly used for shoveling soil, sand, lime, coal and other bulk materials, but also for ore, hard soil and other light shoveling operations. With the different auxiliary working device, wheel loader also can be used for bulldozing, lifting, loading and unloading of other materials such as wood.
| Item | WL-636 |
| Bucket Capacity(m³) | 1.7 |
| Tipping Loading Weight(kg) | 3600 |
| Operating Weight(kg) | 10000 |
| Dumping Height(mm) | 3300 |
| Overall Dimension(L*W*G)(mm) | 7120*2440*3137 |
Wheel Loader Application
In the road construction, especially in the high-grade highway, the wheel loader equipment is used for the filling and digging of the roadbed engineering, the aggregate and loading of asphalt mixture and cement concrete yard, etc. In addition, wheel loader for sale also can push the soil, scrape the ground and pull over other machinery and some other operations. Because the wheel loader machine has the advantages of fast operation speed, high efficiency, good mobility and convenient operation, it has become one of the main construction machinery of earthwork construction in engineering construction.
| Item | WL-08 |
| Bucket Capacity(m³) | 0.5 |
| Tipping Loading Weight(kg) | 800 |
| Operating Weight(kg) | 2900 |
| Dumping Height(mm) | 2400 |
| Overall Dimension(L*W*G)(mm) | 4200*1600*2550 |
Different Types Wheel Loaders
Generally, the wheel loaders Indonesia are classified according to the engine powder, transmission form, walking system structure and loading mode.
- According to the engine power. ①The power less than 74KW is small loader; ② the power of 74 ~ 147kW is medium loader ③ the power of 147 ~ 515kW is large loader ④ the power of more than 515kW is extra -large loader.
- According to the transmission mode. ①Hydraulic-mechanical transmission, low impact and vibration, long service life of transmission parts, convenient operation, ② Hydraulic transmission: stepless speed regulation, easy operation, generally only used on small loaders. ③Electric drive: stepless speed regulation, reliable work, simple maintenance, high cost, generally used on large loaders.
- According to the method of loading and unloading: ①Front unloading type: simple structure, reliable work, good visibility, suitable for various working sites, and wide application; ②Rotary type: the working device is installed on a turntable that can rotate 360°, and side unloading does not need to turn. The work efficiency is high, but the structure is complex, the quality is high, the cost is high, and the lateral stability is poor, and it is suitable for smaller venues. ③ Rear unloading type: front loading, rear unloading, high work efficiency, poor work safety.
| Item | WL-06 | WL-08 | WL918 | WL920 | WL926 | WL930 | WL938 | WL636 | WL650 |
| Bucket Capacity(m³) | 0.3 | 0.5 | 0.6 | 0.8 | 0.9 | 1 | 1.3 | 1.7 | 3 |
| Tipping Loading Weight(kg) | 600 | 800 | 1300 | 1600 | 0800 | 2000 | 2800 | 3600 | 5000 |
| Operating Weight(kg) | 1470 | 2900 | 3400 | 3940 | 4540 | 5500 | 6500 | 10000 | 16200 |
| Dumping Height(mm) | 2000 | 2400 | 3000 | 3080 | 3050 | 3400 | 3430 | 3300 | 3200 |
| Overall Dimension(L*W*G)(mm) | 3690*1110*2250 | 4200*1600*2550 | 5500*1780*2630 | 5750*1780*2680 | 5900*1900*2800 | 5960*2010*2850 | 6240*2200*2920 | 7120*2440*3137 | 8247*3068*3409 |
| Dumping reach(mm) | 600 | 700 | 870 | 800 | 770 | 780 | 740 | 1063 | 1267 |
| Wheelbase(mm) | 1340 | 2100 | 2030 | 2050 | 2120 | 1430 | 2420 | 2770 | 3300 |
| Engine | Changchai/Perkins | Changchai/Xinchai | Xinchai/Cummins | Xinchai/Weichai | Yunne | Yunnei/Cummins | Weichai/Cummins | Weichai/Cummins | Weichai/Cummins |
| Reted Power(kw) | 15-25 | 25-42 | 30-42 | 37-47 | 55 | 72-83 | 92 | 92 | 162 |
| Maximum Torque(Nm) | 67 | 67 | 190 | 220 | 255 | 350 | 400 | 520 | 920 |
| Tyre Type | 26/12-12L | 7.50-16 | 20.5/70-16 | 23.5/16 | 16/70-20 | 16/70-20 | 16/90-24 | 17.5-25 | 23.5-25 |
| Drive Mode | 4WD | 4WD | 4WD | 4WD | 4WD | 4WD | 4WD | 4WD | 4WD |
| Max.gradealibity | 20° | 30° | 30° | 30° | 30° | 30° | 30° | 28° | 30° |
| Max.speed (km/h) | 12 | 25 | 20 | 23 | 25 | 30 | 35 | 37.7 | 35 |
| Fuel tank capacity(L) | 32 | 65 | 65 | 70 | 80 | 80 | 120 | 168 | 273 |
| Item | WL-918 |
| Bucket Capacity(m³) | 0.6 |
| Tipping Loading Weight(kg) | 1300 |
| Operating Weight(kg) | 3400 |
| Dumping Height(mm) | 3000 |
| Overall Dimension(L*W*G)(mm) | 5500*1780*2680 |
Wheel Loader Maintenance
- Because the construction machinery is special vehicle, the operator should accept the manufacturer’s training and guidance, and then have a full understanding of the structure and performance of the machine, and obtain a certain amount of experience in operation and maintenance before operating the wheel loader machine. The “Product Use and Maintenance Manual” provided by the manufacturer is the necessary information for the operator for the equipment operation. Before operating the machine, it is necessary to read the “Use and Maintenance Manual” firstly and carry out operation and maintenance according to the requirements.
- Pay attention to the work load in the running-in period, half of the work load in the running-in period should not exceed 60% of the rated work load, and arrange the appropriate workload to prevent the occurrence of overheating caused by the machine for a long-time continuous operation. Often observe instrument indicator, abnormal situation should be stopped and eliminated in time. Before the cause is not found, the fault is not eliminated, the operation should be stopped.
- Pay attention to regularly check the quality of lubricating oil, hydraulic oil, cooling liquid, brake fluid and fuel oil (water), and pay attention to check the tightness of whole machine. In the inspection, if you find that the oil is less and water is too much, you should analyze the reason at the same time, the lubrication of each lubrication point should be strengthened. It is suggested that grease should be added to the lubrication point in each shift during the running-in-period (except for special requirement).
- Keep the machine clean, adjust and tighten the loose parts in time to prevent the loosening from aggravating the wear of the parts or causing the loss of the parts.
Operation Instructions
- Before driving and operation, Operators should be familiar with the performance, structure, technical maintenance, operation methods of the loader, and operate in accordance with the instructions.
- Except the driving cab, it is strictly prohibited to ride people in any place.
- When unloading materials into the car, the bucket must be raised to a height that will not touch the carriage baffle plate to prevent the bucket from touching the truck bed, and it is strictly forbidden to pass the bucket over the top of the car cab.
- When going downhill, adopt the automatic deceleration, and do not step on the clutch pedal to prevent cut off the power and make car slipping accident.
- After the wheel loader wading, the wheel loader equipment should be stopped and check immediately. If it is found that the break failure due to inundating, should adopt the continuous break to utilize the heat to remove the water in the brake pad, and restore the brake to normal as soon as possible.
- When the loader is working, no people are allowed to stand in front of it, and the bucket is not allowed to carry people during driving.
- When working, it is strictly forbidden to stand under the shovel arm, and irrelevant personnel and other machinery are prohibited from working and passing here.
- High gear operation is strictly prohibited.
- When the operator leaves the driving position, must land the bucket, turn off the engine and cut off the power supply.
| Item | WL-06 | WL-08 | WL918 | WL920 | WL926 | WL930 | WL938 | WL636 | WL650 |
| Bucket Capacity(m³) | 0.3 | 0.5 | 0.6 | 0.8 | 0.9 | 1 | 1.3 | 1.7 | 3 |
| Tipping Loading Weight(kg) | 600 | 800 | 1300 | 1600 | 0800 | 2000 | 2800 | 3600 | 5000 |
| Operating Weight(kg) | 1470 | 2900 | 3400 | 3940 | 4540 | 5500 | 6500 | 10000 | 16200 |
| Dumping Height(mm) | 2000 | 2400 | 3000 | 3080 | 3050 | 3400 | 3430 | 3300 | 3200 |
| Overall Dimension(L*W*G)(mm) | 3690*1110*2250 | 4200*1600*2550 | 5500*1780*2630 | 5750*1780*2680 | 5900*1900*2800 | 5960*2010*2850 | 6240*2200*2920 | 7120*2440*3137 | 8247*3068*3409 |
| Dumping reach(mm) | 600 | 700 | 870 | 800 | 770 | 780 | 740 | 1063 | 1267 |
| Wheelbase(mm) | 1340 | 2100 | 2030 | 2050 | 2120 | 1430 | 2420 | 2770 | 3300 |
| Engine | Changchai/Perkins | Changchai/Xinchai | Xinchai/Cummins | Xinchai/Weichai | Yunne | Yunnei/Cummins | Weichai/Cummins | Weichai/Cummins | Weichai/Cummins |
| Reted Power(kw) | 15-25 | 25-42 | 30-42 | 37-47 | 55 | 72-83 | 92 | 92 | 162 |
| Maximum Torque(Nm) | 67 | 67 | 190 | 220 | 255 | 350 | 400 | 520 | 920 |
| Tyre Type | 26/12-12L | 7.50-16 | 20.5/70-16 | 23.5/16 | 16/70-20 | 16/70-20 | 16/90-24 | 17.5-25 | 23.5-25 |
| Drive Mode | 4WD | 4WD | 4WD | 4WD | 4WD | 4WD | 4WD | 4WD | 4WD |
| Max.gradealibity | 20° | 30° | 30° | 30° | 30° | 30° | 30° | 28° | 30° |
| Max.speed (km/h) | 12 | 25 | 20 | 23 | 25 | 30 | 35 | 37.7 | 35 |
| Fuel tank capacity(L) | 32 | 65 | 65 | 70 | 80 | 80 | 120 | 168 | 273 |
Daswell Wheel Loader in Indonesia
Wheel loader Indonesia is extremely popular in the construction industry. Daswell machinery has set the branch in Indonesia, we have office and warehouse there. We provide different wheel loader models, and provide our customers with competitive wheel loader price. If you want to buy wheel loader Indonesia, we Daswell machinery is a good choice for you. We promise we provide the high-quality product and considerable service for you. And you can see our wheel loader your local area, and our professional salesman will help you choose the suitable type and models according to your requirement and situation.